AdvertiseDonate
☰ SectionsNews from America’s biggest cities.
United Media Now · 2000 Auburn Drive, Suite 200, Beachwood, OH 44122

Micron Sets Late 2027 Launch for G11 NAND With Double Density

The new chips will use wafer bonding to reach 42 Gb/mm2 and 5,400 MT/s speeds.

By Chioma Brooks ·

Illustration for: Micron Sets Late 2027 Launch for G11 NAND With Double Density
Illustration generated for this article, not a news photograph.

Memory manufacturers face pressure to increase storage capacity while reducing power usage. Micron announced this week that its next generation of 3D NAND flash, designated G11, will begin ramping up in the second half of 2027. The company stated that the new technology will provide approximately twice the storage density of its current products.

Micron specified that G11 will increase storage density from about 21 Gb/mm2 to 42 Gb/mm2 in triple-level-cell form. Input/output speeds will rise by up to 50%, moving from 3,600 MT/s to 5,400 MT/s. Energy consumption per bit is projected to drop by more than 25%. These figures position the new chips ahead of competing next-generation NAND products from Kioxia and Samsung.

The primary technical shift in G11 is the adoption of wafer-on-wafer bonding. This method allows Micron to manufacture the NAND array and the peripheral circuitry on separate wafers. Each wafer is produced using a process optimized for its specific function before the two are bonded together. This approach offers more flexibility than the CMOS-under-array designs used in previous generations.

Scott DeBoer, president and chief technology and products officer at Micron, confirmed the use of wafer-on-wafer bonding. He described G11 as the world's most advanced NAND and said the timing aligns with the company's promise to introduce the technology when it becomes cost-effective. DeBoer emphasized that the new design meets current product specification requirements.

The G11 architecture will include more than 400 layers, although Micron has not disclosed the exact number of active wordline layers. The company stated the design features an industry-leading memory cell pitch. This indicates that the density improvement results from both additional layers and smaller cell dimensions. Micron plans to release further technical details closer to the start of high-volume production in 2027.

Micron intends to use G11 in conventional high-capacity solid-state drives for client and data center applications. The company also targets the technology for newer storage devices built for artificial intelligence workloads. These applications require greater bandwidth and improved energy efficiency. Micron stated it will continue scaling in all three dimensions beyond G11 by developing high-mobility materials and ultra-dense cell architectures.

More Tech · Report a business · Got a Story?

Get United Media Now in your inboxNews from America’s biggest cities. Free, a few times a week, unsubscribe any time.

Related stories

Get United Media Now in your inboxNews from America’s biggest cities. Free, a few times a week, unsubscribe any time.